Bottle filling line
Program a PLC to index bottles, fill them for a set time and count them, with a SCADA screen showing the process.
PLC & SCADA Course Online from India
Learn to program PLCs in ladder logic and FBD, wire control panels and build SCADA screens that monitor and control real industrial processes. Live trainer-led classes for learners worldwide, with hybrid and 100% offline options in India.
Live online5 levels44–64 hYour time zone
01About the course
What you will learn in PLC & SCADA
A PLC (programmable logic controller) is a rugged industrial computer that reads sensors and switches and turns motors, valves and lamps on or off according to a program. SCADA (supervisory control and data acquisition) software sits above the PLCs and shows the process on screen, with live values, alarms, trends and recipes. In this course you write ladder logic and function block programs, wire relay panels, and build SCADA screens in tools such as Siemens WinCC, Wonderware InTouch and Omron CX-Supervisor.
This page is for learners outside Vellore, Katpadi and Ranipet – NRIs, professionals in the Gulf and other countries, and students elsewhere in India who want PLC & SCADA taught live by a trainer.
Basic computer use and a basic idea of electrical circuits (switches, relays, contactors) are enough. An electrical, electronics or instrumentation background makes the course easier.
At a glance
- 5 programme levels: 44–64 h
- Live online, hybrid or offline in India
- Projects assessed before certification
- Certificate from the Livewire network
- Batches fixed around your time zone
02Outcomes
Skills you will be able to show
- Explain types of industrial automation and where PLCs and SCADA fit
- Describe PLC architecture, isolation barriers and types of PLC
- Write ladder programs using latching, interlocking, memory, timers, counters, jumps and subroutines
- Use comparison, move, math and logic instructions and function block diagrams
- Configure hardware, then download and upload programs to a PLC or simulator
- Wire a simple relay control panel with selector-switch modes
03Syllabus
PLC & SCADA syllabus by level
Every module and topic taught in the classroom batch is covered online. Open a level to see its modules.
Foundation level
Course on PLC & SCADA (MITSUBISHI)
Beginners in automation who want a 44-hour course on Mitsubishi FX PLCs with GX Works2 and Wonderware InTouch SCADA.
44 hours11 modules · 90 topicsCertificate: Livewire network
01Introduction to Industrial Automation7 topics
What industrial automation isApplications of industrial automationHistory of industrial automationTypes of automationNeed for automation in industriesExamples of industrial automationAutomation tools used in industries
02Programmable Logic Controller Basics7 topics
Introduction to the PLCAdvantages of a PLC over other control devicesAutomated environments for various applicationsNeed for PLCs in industrial automationBlock diagram of a PLCInternal architecture and isolation barriersTypes of PLC
03PLC Programming and Ladder Logic9 topics
Introduction to PLC programmingTypes of PLC programming languagesLadder logic conceptDo's and don'ts in ladder logicLatching and unlatchingNeed for push buttons in industryInterlocking and types of interlockingMemory conceptExercises: ladder programs using interlocking and memory
04Mitsubishi FX Series PLC and GX Works26 topics
Introduction to the Mitsubishi PLC seriesAddressing for Mitsubishi PLCHardware of the FX2N CPU (FX series)Working with GX Works2Toolbar descriptionMemory mapping
05Timers, Counters and Program Control4 topics
Types of timers and countersJump conceptSubroutine conceptExercises: ladder programs using timers and counters
06Instructions, Data Handling and PC–PLC Communication10 topics
Sequential input and output instructions (NO, NC, Coil, Set, Reset)Classification of data typesMove and logical functionsComparison instructions (>, <, =, <>, >=, <=)Compute and math instructions (+, −, ×, ÷)One-pulse instructionsMC and MCR instructionsInterfacing PC and PLC with the supported protocolDownloading a ladder programUploading a ladder program
07SCADA and Wonderware InTouch12 topics
What SCADA isSCADA architectureHistory of SCADATypes of communication systemsNeed for control and monitoring in industrial automationWorking with Wonderware InTouchCreating an applicationSetting window propertiesWorking with different windowsDatabase creationTag name creationDesigning a digital and analog process
08Dynamic Properties and Scripts10 topics
BlinkColour changeObject sizeMovementPercent fillValue displayUser inputShow/hide windowScripts and their typesDesigning an industrial process using scripts
09Alarms, Trends and Data Exchange7 topics
Types of alarmsMonitoring alarmsAlarm priority and acknowledgementDisplaying and storing alarmsDDE: exchanging data with ExcelReal-time trendsHistorical trends
10ODBC and Recipe Management8 topics
Creating a new databaseData source and pathDB link creationSQL script functionsThird-party software communicationExporting data to MS ExcelRecipe management in SCADACreating a recipe
11Panel Wiring, Industrial Applications and PLC–SCADA Interfacing10 topics
Control panel design and wiringRelay wiringSelector switch for different modes of controlExercises: panel designingFilling machineBottle fillingConveyor applicationsDrilling machineInterfacing PLC and SCADA in real-time applicationsMonitoring and controlling a process using SCADA
Foundation level
Course on PLC & SCADA(SIEMENS/OMRON)
Learners who want 64 hours covering two popular PLC platforms – Siemens (STEP 7, TIA Portal, WinCC) and Omron (CX-Programmer, CX-Supervisor).
64 hours12 modules · 137 topicsCertificate: Livewire network
01Introduction to Industrial Automation7 topics
What industrial automation isApplications of industrial automationHistory of industrial automationTypes of automationNeed for automation in industriesExamples of industrial automationAutomation tools used in industries
02PLC Basics and Ladder Logic16 topics
Introduction to the PLCAdvantages of a PLC over other control devicesAutomated environments for various applicationsNeed for PLCs in industrial automationBlock diagram of a PLCInternal architecture and isolation barriersTypes of PLCIntroduction to PLC programmingTypes of PLC programming languagesLadder logic conceptDo's and don'ts in ladder logicLatching and unlatchingNeed for push buttons in industryInterlocking and types of interlockingMemory conceptExercises: ladder programs using interlocking and memory
03Siemens S7-300 and STEP 79 topics
Hardware of the S7-300 CPU 313CWorking with STEP 7 SIMATIC ManagerSIMATIC Manager toolbarSTEP 7 addressing modesMemory mappingBit logic operationsComparator operationsTimer and counter blocks in STEP 7Jump instructions
04TIA Portal and S7-120015 topics
Working with TIA Portal V13Hardware configuration and project creationInserting instructions into the user programDownloading the programMemory mappingAnalog and digital function blocksMath operationsMove block for analog valuesConversion functionsWord logic operationsShift and rotate instructionsDB call functionInteger and floating-point functionsProgram control operationsTimer and counter operations
05FBD and Virtual Simulation8 topics
Introduction to FBDConverting LAD to FBDProgramming logical functions in FBDExercises: timers and countersVirtual simulationHardware configuration and PG/PC interfaceInterfacing PC and PLC with MPI protocolDownloading and uploading a program
06Omron CP1E PLC and CX-Programmer11 topics
Addressing for Omron PLCHardware configurationWorking with CX-ProgrammerTypes of timers and counters in the CP1E seriesJump types and industrial applicationsSubroutine conceptSequential instructions (SET, RESET, KEEP, DIFU, DIFD)Comparison and data move instructionsMath instructionsVirtual simulation and PC–PLC interfacingDownloading and uploading a ladder program
07SCADA and Siemens WinCC Basics12 topics
What SCADA isSCADA architectureHistory of SCADATypes of communication systemsNeed for control and monitoring in industrial automationIntroduction to Siemens WinCCComponents of WinCC flexibleGUI elements of WinCCNew project creationWorking with screensOutput, Object, Properties and Project windowsReference Text, Tools and Script Wizard windows
08Tags, Screen Design and Enable Objects16 topics
Internal and external tagsData types and acquisition cyclesImporting and exporting tagsCreating new connectionsDeveloping screens with the object toolbar and graphics librarySimple objects: line, polyline, polygon, ellipse, text fieldI/O, date-time, graphic I/O and symbolic I/O fieldsGraphic view, button, switch and barMove, rotate, mirror, transparency and alignmentGrouping and ungrouping objectsSlider, clock and status forceSmart client view, HTML browser and user viewGauge, trend view and symbol libraryRecipe view and alarm viewWinCC flexible libraryButtons, switches and faceplates
09Object Animation and Scripts8 topics
General settings: button mode, hotkeys, textProperties: appearance, layout, flashing, securityAnimation: appearance and enable/disable objectDiagonal, horizontal, vertical and direct movementVisibility, size and fillingEvents: click, press, release, activate, deactivate, changeNew script creation and Script WizardText and graphics lists
10Recipes, Alarms and Historical Data7 topics
Recipe creation for paint mixing and soft drink mixingSkipping a process in sequence controlAnalog and discrete alarmsAlarm settings and designing an alarm systemData logs and alarm logsImporting and exporting data to ExcelODBC: new database creation and Excel import/export
11Omron CX-Supervisor and CX-Simulator18 topics
Working with CX-SupervisorCreating a project and pagePage properties and windowsPoint Editor windowAnimations: blink, colour change, display and edit valueMove, fill, resize, rotate and visibilityInterfacing PLC to SCADASimulation and real-time run modeCreating a virtual PLC with CX-SimulatorLinking CX-Programmer and CX-Supervisor without a real PLCAnalog process with slider and linear/rotational gaugesWindows scriptsRecipe editor and Recipe ManagerOLE controls: picture, PDF, Word, ExcelSimple, dead-band and rate-of-change alarmsAlarm logging, viewing and printingReal-time and historical trends, bar chart and scatter graphODBC, data logging and DDE
12Panel Wiring, Industrial Applications and PLC–SCADA Interfacing10 topics
Control panel design and wiringRelay wiringSelector switch for different modes of controlExercises: panel designingFilling machineBottle fillingConveyor applicationsDrilling machineInterfacing PLC and SCADA in real-time applicationsMonitoring and controlling a process using SCADA
Foundation level
Course on PLC AND SCADA (HONEYWELL / ABB)
Learners who want a 64-hour course built on ABB PLC programming with Control Builder Plus (CODESYS) and Wonderware InTouch SCADA.
64 hours11 modules · 86 topicsCertificate: Livewire network
01Introduction to Industrial Automation7 topics
What industrial automation isApplications of industrial automationHistory of industrial automationTypes of automationNeed for automation in industriesExamples of industrial automationAutomation tools used in industries
02Programmable Logic Controller Basics7 topics
Introduction to the PLCAdvantages of a PLC over other control devicesAutomated environments for various applicationsNeed for PLCs in industrial automationBlock diagram of a PLCInternal architecture and isolation barriersTypes of PLC
03PLC Programming and Ladder Logic9 topics
Introduction to PLC programmingTypes of PLC programming languagesLadder logic conceptDo's and don'ts in ladder logicLatching and unlatchingNeed for push buttons in industryInterlocking and types of interlockingMemory conceptExercises: ladder programs using interlocking and memory
04ABB PLC and Control Builder Plus (CODESYS)3 topics
Addressing for ABB PLCHardware configurationWorking with ABB Control Builder Plus (CODESYS)
05Timers, Counters and Program Control4 topics
Types of timers and countersJump conceptSubroutine conceptExercises: ladder programs using timers and counters
06Instructions, Data Handling and PC–PLC Communication9 topics
Sequential input and output instructions (NO, NC, Coil, Set, Reset)Classification of data typesMove and logical functionsComparison instructions (>, <, =, <>, >=, <=)Compute and math instructions (+, −, ×, ÷)Function Block Diagram (FBD)Interfacing PC and PLC with the supported protocolDownloading a ladder programUploading a ladder program
07SCADA and Wonderware InTouch12 topics
What SCADA isSCADA architectureHistory of SCADATypes of communication systemsNeed for control and monitoring in industrial automationWorking with Wonderware InTouchCreating an applicationSetting window propertiesWorking with different windowsDatabase creationTag name creationDesigning a digital and analog process
08Dynamic Properties and Scripts10 topics
BlinkColour changeObject sizeMovementPercent fillValue displayUser inputShow/hide windowScripts and their typesDesigning an industrial process using scripts
09Alarms, Trends and Data Exchange7 topics
Types of alarmsMonitoring alarmsAlarm priority and acknowledgementDisplaying and storing alarmsDDE: exchanging data with ExcelReal-time trendsHistorical trends
10ODBC and Recipe Management8 topics
Creating a new databaseData source and pathDB link creationSQL script functionsThird-party software communicationExporting data to MS ExcelRecipe management in SCADACreating a recipe
11Panel Wiring, Industrial Applications and PLC–SCADA Interfacing10 topics
Control panel design and wiringRelay wiringSelector switch for different modes of controlExercises: panel designingFilling machineBottle fillingConveyor applicationsDrilling machineInterfacing PLC and SCADA in real-time applicationsMonitoring and controlling a process using SCADA
Foundation level
Course on PLC AND SCADA(SIEMENS/ABB)
Learners who want a 64-hour Siemens-focused course with STEP 7, TIA Portal (S7-1200), FBD and WinCC SCADA.
64 hours12 modules · 108 topicsCertificate: Livewire network
01Introduction to Industrial Automation7 topics
What industrial automation isApplications of industrial automationHistory of industrial automationTypes of automationNeed for automation in industriesExamples of industrial automationAutomation tools used in industries
02Programmable Logic Controller Basics7 topics
Introduction to the PLCAdvantages of a PLC over other control devicesAutomated environments for various applicationsNeed for PLCs in industrial automationBlock diagram of a PLCInternal architecture and isolation barriersTypes of PLC
03PLC Programming and Ladder Logic9 topics
Introduction to PLC programmingTypes of PLC programming languagesLadder logic conceptDo's and don'ts in ladder logicLatching and unlatchingNeed for push buttons in industryInterlocking and types of interlockingMemory conceptExercises: ladder programs using interlocking and memory
04Siemens S7-300 and STEP 79 topics
Hardware of the S7-300 CPU 313CWorking with STEP 7 SIMATIC ManagerSIMATIC Manager toolbarSTEP 7 addressing modesMemory mappingBit logic operationsComparator operationsTimer and counter blocks in STEP 7Jump instructions
05TIA Portal and S7-120015 topics
Working with TIA Portal V13Hardware configuration and project creationInserting instructions into the user programDownloading the programMemory mappingAnalog and digital function blocksMath operationsMove block for analog valuesConversion functionsWord logic operationsShift and rotate instructionsDB call functionInteger and floating-point functionsProgram control operationsTimer and counter operations
06Function Block Diagram (FBD)4 topics
Introduction to FBDConverting LAD to FBDProgramming logical functions in FBDExercises: timers and counters
07Virtual Simulation and Communication4 topics
Virtual simulationHardware configuration and PG/PC interfaceInterfacing PC and PLC with MPI protocolDownloading and uploading a program
08SCADA and Siemens WinCC Basics12 topics
What SCADA isSCADA architectureHistory of SCADATypes of communication systemsNeed for control and monitoring in industrial automationIntroduction to Siemens WinCCComponents of WinCC flexibleGUI elements of WinCCNew project creationWorking with screensOutput, Object, Properties and Project windowsReference Text, Tools and Script Wizard windows
09Tags, Screen Design and Enable Objects16 topics
Internal and external tagsData types and acquisition cyclesImporting and exporting tagsCreating new connectionsDeveloping screens with the object toolbar and graphics librarySimple objects: line, polyline, polygon, ellipse, text fieldI/O, date-time, graphic I/O and symbolic I/O fieldsGraphic view, button, switch and barMove, rotate, mirror, transparency and alignmentGrouping and ungrouping objectsSlider, clock and status forceSmart client view, HTML browser and user viewGauge, trend view and symbol libraryRecipe view and alarm viewWinCC flexible libraryButtons, switches and faceplates
10Object Animation and Scripts8 topics
General settings: button mode, hotkeys, textProperties: appearance, layout, flashing, securityAnimation: appearance and enable/disable objectDiagonal, horizontal, vertical and direct movementVisibility, size and fillingEvents: click, press, release, activate, deactivate, changeNew script creation and Script WizardText and graphics lists
11Recipes, Alarms and Historical Data7 topics
Recipe creation for paint mixing and soft drink mixingSkipping a process in sequence controlAnalog and discrete alarmsAlarm settings and designing an alarm systemData logs and alarm logsImporting and exporting data to ExcelODBC: new database creation and Excel import/export
12Panel Wiring, Industrial Applications and PLC–SCADA Interfacing10 topics
Control panel design and wiringRelay wiringSelector switch for different modes of controlExercises: panel designingFilling machineBottle fillingConveyor applicationsDrilling machineInterfacing PLC and SCADA in real-time applicationsMonitoring and controlling a process using SCADA
Foundation level
Course on PLC and SCADA
Beginners who want a complete 64-hour PLC and SCADA course, from ladder logic and panel wiring to SCADA screens, alarms, trends and recipes.
64 hours11 modules · 86 topicsCertificate: Livewire network
01Introduction to Industrial Automation7 topics
What industrial automation isApplications of industrial automationHistory of industrial automationTypes of automationNeed for automation in industriesExamples of industrial automationAutomation tools used in industries
02Programmable Logic Controller Basics7 topics
Introduction to the PLCAdvantages of a PLC over other control devicesAutomated environments for various applicationsNeed for PLCs in industrial automationBlock diagram of a PLCInternal architecture and isolation barriersTypes of PLC
03PLC Programming and Ladder Logic9 topics
Introduction to PLC programmingTypes of PLC programming languagesLadder logic conceptDo's and don'ts in ladder logicLatching and unlatchingNeed for push buttons in industryInterlocking and types of interlockingMemory conceptExercises: ladder programs using interlocking and memory
04ABB PLC and Control Builder Plus (CODESYS)3 topics
Addressing for ABB PLCHardware configurationWorking with ABB Control Builder Plus (CODESYS)
05Timers, Counters and Program Control4 topics
Types of timers and countersJump conceptSubroutine conceptExercises: ladder programs using timers and counters
06Instructions, Data Handling and PC–PLC Communication9 topics
Sequential input and output instructions (NO, NC, Coil, Set, Reset)Classification of data typesMove and logical functionsComparison instructions (>, <, =, <>, >=, <=)Compute and math instructions (+, −, ×, ÷)Function Block Diagram (FBD)Interfacing PC and PLC with the supported protocolDownloading a ladder programUploading a ladder program
07SCADA and Wonderware InTouch12 topics
What SCADA isSCADA architectureHistory of SCADATypes of communication systemsNeed for control and monitoring in industrial automationWorking with Wonderware InTouchCreating an applicationSetting window propertiesWorking with different windowsDatabase creationTag name creationDesigning a digital and analog process
08Dynamic Properties and Scripts10 topics
BlinkColour changeObject sizeMovementPercent fillValue displayUser inputShow/hide windowScripts and their typesDesigning an industrial process using scripts
09Alarms, Trends and Data Exchange7 topics
Types of alarmsMonitoring alarmsAlarm priority and acknowledgementDisplaying and storing alarmsDDE: exchanging data with ExcelReal-time trendsHistorical trends
10ODBC and Recipe Management8 topics
Creating a new databaseData source and pathDB link creationSQL script functionsThird-party software communicationExporting data to MS ExcelRecipe management in SCADACreating a recipe
11Panel Wiring, Industrial Applications and PLC–SCADA Interfacing10 topics
Control panel design and wiringRelay wiringSelector switch for different modes of controlExercises: panel designingFilling machineBottle fillingConveyor applicationsDrilling machineInterfacing PLC and SCADA in real-time applicationsMonitoring and controlling a process using SCADA
04Tools covered
Software and tools you will use
Siemens STEP 7 SIMATIC Manager (S7-300)Siemens TIA Portal (S7-1200)Siemens WinCCMitsubishi GX Works2 (FX series)Omron CX-Programmer (CP1E)Omron CX-Supervisor and CX-SimulatorABB Control Builder Plus (CODESYS)Wonderware InTouchLadder logic and Function Block DiagramODBC, DDE and Excel data export
We provide training and instruction only. Software and licences are not included; use your own licence, or an educational or trial licence where the software maker offers one. See our Software & Licensing Policy. Certificates are skill-training certificates, not degrees or professional licences.
05Projects
Practice projects
Conveyor sorting
Control a conveyor with sensors, interlocks and timers, and animate it on the SCADA screen.
Drilling machine sequence
Build a step-by-step drilling sequence with safety interlocks and manual/auto selector modes.
Paint or soft drink mixing recipe
Create recipes in SCADA that load different ingredient quantities into the PLC.
06How online works
How the PLC & SCADA course runs online
Pick the mode that matches where you are and what you can travel for.
Live online
Trainer-led sessions on your own computer. Same syllabus, project and certificate as classroom batches. Evening, early-morning or weekend slots in your time zone.
Hybrid
Part online, part in the lab. Take lab sessions at Vellore, Katpadi or Ranipet when you visit India, and the rest online. Depends on trainer and lab availability.
100% offline in India
Learn at our centres on any date that suits you and the trainer. Fast-track schedules possible. Partner-centre options in other cities are explored case by case.
07Class timings
Find your class time
Example slots for popular regions. Your exact timing is fixed with the trainer on WhatsApp.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| Dubai · Abu Dhabi | Weekday evening | 7:00 PM–9:00 PM | 8:30 PM–10:30 PM |
| Dubai · Abu Dhabi | Weekday early morning | 6:00 AM–8:00 AM | 7:30 AM–9:30 AM |
| Dubai · Abu Dhabi | Weekend morning | 9:00 AM–11:00 AM | 10:30 AM–12:30 PM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| London · Manchester · Birmingham | Weekday evening | 7:00 PM–9:00 PM | 12:30 AM–2:30 AM (next day) late night in Indiawinter · summer: 11:30 PM–1:30 AM late night in India |
| London · Manchester · Birmingham | Weekday early morning | 6:00 AM–8:00 AM | 11:30 AM–1:30 PMwinter · summer: 10:30 AM–12:30 PM |
| London · Manchester · Birmingham | Weekend morning | 9:00 AM–11:00 AM | 2:30 PM–4:30 PMwinter · summer: 1:30 PM–3:30 PM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| Singapore | Weekday evening | 7:00 PM–9:00 PM | 4:30 PM–6:30 PM |
| Singapore | Weekday early morning | 6:00 AM–8:00 AM | 3:30 AM–5:30 AM late night in India |
| Singapore | Weekend morning | 9:00 AM–11:00 AM | 6:30 AM–8:30 AM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
08By country
PLC & SCADA for learners in your country
09Pair it with
Related online courses
Electrical CADD
Electrical CAD (AutoCAD Electrical) Course
Learn AutoCAD Electrical to draw control schematics, number wires, lay out PLC and panel drawings and generate BOMs and wiring reports.
2 levels64–80 h
Online details Electrical CADD
Basic Electrical (Executive Diploma) Course
A short, practical start in electrical fundamentals – circuits, wiring, earthing, safety and reading electrical drawings.
1 level20 h
Online details Special Programs
Internet of Things (IoT) Course
Build connected devices with Arduino, NodeMCU, ESP8266 and Raspberry Pi, send sensor data to the cloud and control things from your phone.
2 levels48 h
Online details Electronic Design Automation
Microcontroller & Embedded C Course
Program 8051, PIC, AVR and ARM7 microcontrollers in embedded C – interface displays, motors and sensors, and connect over UART, I2C, SPI, CAN and wireless.
2 levels64 h
Online details 10FAQ
PLC & SCADA online – FAQ
Still have a question? Message us on WhatsApp.
Ask on WhatsAppCan I learn PLC & SCADA online from outside India?
Yes. PLC & SCADA is taught live online by a trainer, with the same syllabus, hours and project as the classroom batch. Batches are planned around your time zone, subject to trainer availability.
How many hours is the PLC & SCADA course?
PLC & SCADA is offered at 5 levels (44–64 h): Course on PLC & SCADA (MITSUBISHI) – 44 hours; Course on PLC & SCADA(SIEMENS/OMRON) – 64 hours; Course on PLC AND SCADA (HONEYWELL / ABB) – 64 hours; Course on PLC AND SCADA(SIEMENS/ABB) – 64 hours; Course on PLC and SCADA – 64 hours.
Do I need to buy the software?
We teach; we do not supply software. Use your own licence or an educational or trial licence where the maker offers one. Our Software & Licensing Policy explains the rules.
Can I attend some classes in person in India?
Yes. Hybrid and fully offline options are available at our Vellore, Katpadi and Ranipet centres on dates agreed in advance, depending on trainer and lab availability.
What does it cost?
Fees depend on the level and mode. Message +91 8111 029 125 on WhatsApp for the current fee and payment options for your country.
Will I get a certificate?
On completing the course and its project you receive the Livewire network certificate. It is a skill-training certificate, not a degree or a professional licence.
Start from anywhere
Get the PLC & SCADA syllabus, fee and next batch
Tell us your country and preferred time. We reply on WhatsApp with the syllabus, fee and the next available batch.
- Live online, hybrid or 100% offline in India
- Batches in your time zone, based on trainer availability
- Free counselling and a syllabus on WhatsApp
- One number for everything: +91 8111 029 125