G+3 RCC residential frame
Model a multi-storey building, apply dead, live, floor and wind loads, and design beams and columns.
STAAD.Pro Course Online from India
Model, load, analyse and design concrete and steel structures in STAAD.Pro – from simple frames to seismic checks and footings. Live trainer-led classes for learners worldwide, with hybrid and 100% offline options in India.
Live online2 levels40–80 hYour time zone
01About the course
What you will learn in STAAD.Pro
STAAD.Pro is structural analysis and design software from Bentley Systems. Engineers use it to build a model of a structure – a building frame, truss, tower, bridge deck or industrial shed – apply dead, live, wind and earthquake loads, and then check how every beam, column and slab behaves. It calculates forces, bending moments and deflections, and designs members to Indian and international codes. Consultancy firms, EPC contractors and design offices use STAAD.
This page is for learners outside Vellore, Katpadi and Ranipet – NRIs, professionals in the Gulf and other countries, and students elsewhere in India who want STAAD.Pro taught live by a trainer.
Basic computer use and a civil engineering background (diploma or degree, or pursuing one). Knowing strength of materials and RCC/steel design basics helps you get much more from the course.
At a glance
- 2 programme levels: 40–80 h
- Live online, hybrid or offline in India
- Projects assessed before certification
- Certificate from the CADD Centre network
- Batches fixed around your time zone
02Outcomes
Skills you will be able to show
- Create structural models using grids, nodes, beams and the Structure Wizard
- Edit models quickly with repeat, mirror, rotate, split and merge tools
- Assign sections, materials, member releases, offsets and supports
- Apply dead, live, floor, wind, moving and seismic loads with load combinations
- Model slabs, walls and shells with plates, meshing and solids
- Run static, response spectrum, P-Delta and buckling analysis and read the results
03Syllabus
STAAD.Pro syllabus by level
Every module and topic taught in the classroom batch is covered online. Open a level to see its modules.
Foundation level
Essential in STAAD.Pro
Civil students and beginners who want a solid 40-hour grounding in modelling, loading, analysis and basic design.
40 hours9 modules · 72 topicsCertificate: CADD Centre network
01Introduction and Interface8 topics
Overview of Structural Analysis and DesignOverview of STAAD.Pro Connect EditionOverview of FundamentalsGUICreating and Opening a New FileUnit System and Coordinate SystemNavigation and Mouse ControlsSTAAD Editor
02Geometry Creation7 topics
Grids and Types of GridsNode Creation: Snap Node, Node Table, Nodes at Overlapping BeamsInsert Node for Single and Multiple MembersBeam Creation: Snap Beam, Beam Layout, Connect Beams AlongPoint to Point, Between Midpoints and Perpendicular IntersectionCurved MembersCreating Geometry Using STAAD Editor
03Structure Wizard8 topics
Units in Structure WizardCreating a TrussCreating a FrameCreating a Continuous BeamCreating a Cylindrical Frame and Beam ModelEditing ParametersTransferring the Model to STAAD.ProAdding Items to the Library
04Model Editing and View Tools8 topics
Select MenuBeam Editing: Split, Stretch, Break, Merge, Renumber, MoveNode Editing: Move, Merge, RenumberTranslational RepeatCircular RepeatMirrorRotateView Tools
05Properties and Specifications8 topics
Material SpecificationSection Profile SpecificationMember OrientationAxial ActionsMember End ReleaseMember OffsetSupport SpecificationGroup Specification
06Loads and Load Combinations10 topics
Creating a Primary Load and Adding Self WeightNodal LoadMember Load: Uniform and Concentrated Force and MomentLinear Varying, Trapezoidal and Hydrostatic LoadPre/Post StressArea LoadFloor LoadWind Load Definition and Wind Load CaseDefining Load CombinationsAutomatic Load Combination and Auto Combination Rules
07Analysis and Finite Elements10 topics
Introduction to AnalysisIntroduction to FEMPlate Generation: 3 or 4-Noded 2D PlatesSurface Objects with HolesTriangular and Infill PlatesPlate Meshing and Surface MeshingSolid 3D Bricks from 4 to 8 NodesComposite DecksStructure Wizard: Surface, Plate and Solid ModelsPlate Thickness
08Plate and Special Loads7 topics
Pressure on Full PlateConcentrated Plate LoadPartial Plate Pressure LoadTrapezoidal and Hydrostatic Plate LoadElement Joint LoadMoving LoadReference Load and Repeat Load
09Design and Reporting6 topics
Batch Design vs Interactive DesignConcrete Design: Column DesignConcrete Design: Beam DesignSteel Design in STAAD.ProDesign of Overhead Transmission Line TowersReport Generation
Professional level
Proficient in STAAD.Pro
Civil and structural engineers who want the full 80-hour workflow including seismic, dynamic analysis, interactive RC design and foundation design.
80 hours11 modules · 105 topicsCertificate: CADD Centre network
01Structural Basics and STAAD.Pro Interface9 topics
Basic Terminologies and Idealization of StructuresCalculation of Shear Force and Bending MomentFacilities, Workflow and Types of Structure in STAAD.ProQuick Access Toolbar, Ribbon Tabs and Tool SearchWorkflow Page Control, Workflows Panel, Data Area and Status BarCreating and Opening FilesInput Units, Display Units, Base Unit System and Unit ConverterGlobal and Local Coordinate SystemsSTAAD Editor, Input Files and STAAD Command Language Syntax
02Grids, Nodes, Beams and Structure Wizard9 topics
Methods of Creating Structure GeometryLinear, Radial and Irregular GridsImporting STAAD.Pro Grid Files and DXF Files as GridsNodes Using Node Table, Snap Node and Command EditorBeams Using Beam Layout, Snap Beam and New NodesBeams at Midpoints, Perpendicular and Curved BeamsConnecting Beams Along X/Y/Z AxisStructure Wizard: Truss, Frame, Continuous Beam and Cylindrical ModelsImporting CAD Models and VBA Macro Models
03Selection, Model Editing and View Tools9 topics
Selection Groups, Drag Box, Drag Line and Drag RegionGeometry, Node, Beam and Physical Member CursorsInverse Selection and Selection by Geometry ListSelecting Entities Parallel to a Plane or Connected to an EntityFiltered Selection and Selection by Property NameSelecting Objects Lacking Input DataInsert Nodes, Break, Stretch, Merge, Renumber and Intersect BeamsTranslational and Circular Repeat, Rotate, Mirror and MoveRotation Mode, 3D Rendering, Labels and Beam End Identification
04Sections, Materials and Specifications12 topics
Prismatic, Tee, Trapezoidal and Tapered SectionsUser Provided Tables and Section DatabaseSection Assignment MethodsIsotropic and Orthotropic Materials and Material ConstantsNode Specification and Rigid LinksMember Orientation, Axial Action Members, End Releases and End OffsetsMember Imperfection, Cable Members and Cracked Section PropertiesMember Fire ProofingFixed, Pinned, Roller, Spring and Multi-Linear Spring SupportsTension/Compression Only Springs, Enforced, Inclined and Foundation SupportsGroup SpecificationSection Wizard and Section Database Manager
05Loading and Load Combinations10 topics
Load Cases and Load DefinitionsSelf Weight, Nodal Loads and Support DisplacementUniform, Concentrated, Linear Varying and Trapezoidal Member LoadsHydrostatic Load, Pre/Post Stress and Floor LoadWind Load GeneratorDesign Wind Speed and Design Wind PressureDefining and Assigning Wind LoadLoad Combinations and Auto Load Combination RulesAnalysing the Model and Using the Output ViewerViewing Reactions, Displacements and Beam Results in Post-Processing
06Plates, Shells and Solids (FEM)12 topics
Finite Element Method, Plate and Shell ElementsPlate Layout, Snap Plate and Infill PlatesCreating Plates Using the Command EditorStructure Wizard: Quadrilateral Plate, Cylindrical Surface and Hyperbolic Paraboloid ShellSpherical Surface, Plates with Holes, Cooling Tower and Bunker or SiloSurface Mesh and Plate MeshParametric Surface Models with Polygonal and Circular OpeningsSlab/Wall Connection4 to 8-Noded Solids and Solid ModelsComposite DecksPlate and Solid CursorsPlate Thickness and Element Release
07Plate, Moving and Bridge Loads9 topics
Full, Partial and Concentrated Plate PressureTrapezoidal and Hydrostatic Plate LoadsElement Joint, Area, Solid and Temperature LoadsDefining Vehicles and Generating Moving Load CasesLoad EnvelopeReference Load and Repeat LoadViewing Plate ResultsSTAAD.Beava: Deck, Roadway and Vehicle DatabaseSTAAD.Beava Load Generator Parameters and Load Cases
08Seismic and Advanced Analysis12 topics
Seismology Concepts and Seismic WavesDesign Horizontal Seismic CoefficientDesign Seismic Base Shear and Its Distribution to Floor LevelsSeismic Definition and Lateral Seismic Loads in STAAD.ProPush-over Analysis, Plastic Hinges and Building PerformanceResponse Spectrum AnalysisTime History AnalysisFrequency Calculation: Rayleigh Method and Modal CalculationMass Modelling Using Reference LoadsP-Delta AnalysisBuckling and Imperfection AnalysisPost-Processing Workflow and Animated Result Videos
09Concrete and Steel Design9 topics
Beam and Column DesignConcrete Design Parameters and Design CommandsReviewing Design ResultsRC Designer Interface and Design OverviewPhysical Members, Design Briefs and Design GroupsDesign CheckSteel Design Process and ParametersSteel Design Commands and ResultsDesign of Overhead Transmission Line Towers
10Foundation Design (STAAD Foundation Advanced)9 topics
Types of FoundationsSTAAD Foundation Advanced WorkflowIsolated Footing: Project Info, Column Positions, Loads and DesignCombined/Strip FootingMat Foundation: Boundary, Mesh, Slab Analysis and Moment EnvelopeMat Reinforcement ZonesPile Cap DesignPlant Foundations: Vertical Vessel, Horizontal Vessel and TankTool Kit: Ribbed Beam Footing
11Import, Export and Reports5 topics
Importing Various ModelsExport to DXF, CIS/2 and SACS Input FilesPrint Current View and Take Picture ToolsReport Setup: Pages, Items, Pictures and Load CasesAdding Name and Logo to Reports
04Tools covered
Software and tools you will use
STAAD.Pro Connect EditionSTAAD Editor and command languageStructure WizardWind Load GeneratorSeismic load definition and response spectrumRC Designer (interactive concrete design)Steel design moduleSTAAD.Beava for bridge decksSTAAD Foundation AdvancedOutput Viewer and post-processingDXF, CIS/2 and SACS exportReport Setup
We provide training and instruction only. Software and licences are not included; use your own licence, or an educational or trial licence where the software maker offers one. See our Software & Licensing Policy. Certificates are skill-training certificates, not degrees or professional licences.
05Projects
Practice projects
Industrial steel truss shed
Build a roof truss and portal frame with the Structure Wizard and carry out steel design.
Seismic check of a building
Calculate base shear, run a response spectrum analysis and compare storey forces and drifts.
Transmission line tower
Model and design an overhead transmission line tower as covered in the syllabus.
06How online works
How the STAAD.Pro course runs online
Pick the mode that matches where you are and what you can travel for.
Live online
Trainer-led sessions on your own computer. Same syllabus, project and certificate as classroom batches. Evening, early-morning or weekend slots in your time zone.
Hybrid
Part online, part in the lab. Take lab sessions at Vellore, Katpadi or Ranipet when you visit India, and the rest online. Depends on trainer and lab availability.
100% offline in India
Learn at our centres on any date that suits you and the trainer. Fast-track schedules possible. Partner-centre options in other cities are explored case by case.
07Class timings
Find your class time
Example slots for popular regions. Your exact timing is fixed with the trainer on WhatsApp.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| Dubai · Abu Dhabi | Weekday evening | 7:00 PM–9:00 PM | 8:30 PM–10:30 PM |
| Dubai · Abu Dhabi | Weekday early morning | 6:00 AM–8:00 AM | 7:30 AM–9:30 AM |
| Dubai · Abu Dhabi | Weekend morning | 9:00 AM–11:00 AM | 10:30 AM–12:30 PM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| London · Manchester · Birmingham | Weekday evening | 7:00 PM–9:00 PM | 12:30 AM–2:30 AM (next day) late night in Indiawinter · summer: 11:30 PM–1:30 AM late night in India |
| London · Manchester · Birmingham | Weekday early morning | 6:00 AM–8:00 AM | 11:30 AM–1:30 PMwinter · summer: 10:30 AM–12:30 PM |
| London · Manchester · Birmingham | Weekend morning | 9:00 AM–11:00 AM | 2:30 PM–4:30 PMwinter · summer: 1:30 PM–3:30 PM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
| City | Slot | Your local time | India time (IST) |
|---|---|---|---|
| Singapore | Weekday evening | 7:00 PM–9:00 PM | 4:30 PM–6:30 PM |
| Singapore | Weekday early morning | 6:00 AM–8:00 AM | 3:30 AM–5:30 AM late night in India |
| Singapore | Weekend morning | 9:00 AM–11:00 AM | 6:30 AM–8:30 AM |
Slots marked “late night in India” need the trainer’s confirmation. Final timings are fixed on WhatsApp based on trainer and student availability; any date and time can be arranged where a trainer is available.
08By country
STAAD.Pro for learners in your country
09Pair it with
Related online courses
Civil / Architectural CADD
ETABS Course
Model multi-storey buildings, apply loads, run analysis and design concrete and steel members with ETABS.
2 levels40–80 h
Online details Civil / Architectural CADD
Structural Design Concepts Course
Understand how RCC beams, columns, slabs, staircases and footings are designed, detailed and estimated – the thinking behind the software.
1 level40 h
Online details Generic
AutoCAD Course
Learn AutoCAD to draw accurate 2D plans and machine drawings, manage layers and blocks, plot to scale and build basic 3D models.
2 levels40–80 h
Online details Civil / Architectural CADD
Revit (Architecture, Structure & MEP) Course
Model buildings in Revit – walls to rebar to ducts – and produce coordinated plans, schedules and sheets from one BIM model.
5 levels40–80 h
Online details 10FAQ
STAAD.Pro online – FAQ
Still have a question? Message us on WhatsApp.
Ask on WhatsAppCan I learn STAAD.Pro online from outside India?
Yes. STAAD.Pro is taught live online by a trainer, with the same syllabus, hours and project as the classroom batch. Batches are planned around your time zone, subject to trainer availability.
How many hours is the STAAD.Pro course?
STAAD.Pro is offered at 2 levels (40–80 h): Essential in STAAD.Pro – 40 hours; Proficient in STAAD.Pro – 80 hours.
Do I need to buy the software?
We teach; we do not supply software. Use your own licence or an educational or trial licence where the maker offers one. Our Software & Licensing Policy explains the rules.
Can I attend some classes in person in India?
Yes. Hybrid and fully offline options are available at our Vellore, Katpadi and Ranipet centres on dates agreed in advance, depending on trainer and lab availability.
What does it cost?
Fees depend on the level and mode. Message +91 8111 029 125 on WhatsApp for the current fee and payment options for your country.
Will I get a certificate?
On completing the course and its project you receive the CADD Centre network certificate. It is a skill-training certificate, not a degree or a professional licence.
Start from anywhere
Get the STAAD.Pro syllabus, fee and next batch
Tell us your country and preferred time. We reply on WhatsApp with the syllabus, fee and the next available batch.
- Live online, hybrid or 100% offline in India
- Batches in your time zone, based on trainer availability
- Free counselling and a syllabus on WhatsApp
- One number for everything: +91 8111 029 125