Every product needs a PCB
PCB design is needed in consumer, automotive, industrial and medical electronics, so the skill is widely used.
Livewire · Electronic Design Automation
OrCAD PCB Design Course in Vellore, Katpadi & Ranipet
Draw schematics in OrCAD Capture, simulate circuits in PSpice and lay out single, double and multilayer PCBs ready for manufacturing.
3 levels20–48 h135 topics3 centresClassroom · Online · Hybrid
01What is OrCAD PCB Design
What is OrCAD PCB Design? In plain words.
OrCAD is a set of electronic design tools from Cadence used to design circuit boards from start to finish. OrCAD Capture is used to draw the schematic, PSpice simulates how the circuit will behave, and OrCAD PCB Editor (built on the Allegro engine) is used to place components, route copper tracks and produce the files a factory needs to make the board. This page covers all three as separate courses.
Every electronic product – a phone charger, a motor controller, an ECU or a medical monitor – needs a printed circuit board. Electronics manufacturers, design service firms and R&D labs hire PCB designers who can build footprints, follow design rules, route multilayer boards and hand over clean Gerber and drill files. Simulation skills in PSpice help engineers catch mistakes before a board is ever made, saving time and cost.
Electronics manufacturing along the Chennai–Bengaluru corridor, including Sriperumbudur and Hosur, needs board designers and prototype engineers. ECE and EEE students in Vellore, Katpadi and Ranipet can also use OrCAD to build proper PCBs for their projects.
What you will be able to do
- Create projects, libraries and custom parts in OrCAD Capture
- Draw single-sheet, multi-sheet and hierarchical schematics with buses, net aliases and off-page connectors
- Annotate, run design rules checks, create a bill of materials and generate a netlist
- Set up PSpice simulation profiles for bias point, transient, DC sweep, AC sweep, parametric and temperature analysis
- Run Monte Carlo and worst-case analysis and mixed analog/digital simulation
- Create padstacks and package footprints and place components on a board outline
- Route single, double and multilayer boards using the Constraint Manager, vias and copper pours
- Generate artwork (Gerber), drill and PDF manufacturing files and fabricate a simple PCB
02Why learn it
Why learn OrCAD PCB Design now?
Six reasons students and professionals in Vellore district pick this skill.
Complete design flow
You go from schematic to simulation to layout to manufacturing files, the same flow used in industry.
Simulate before you build
PSpice lets you test bias points, transient, AC, DC sweep, temperature and Monte Carlo behaviour on screen.
Multilayer design skills
You learn layer stack-up, vias, copper pours and constraint-driven routing for multilayer boards.
Build a real board
The PCB Editor course ends with testing on a breadboard and making a board by toner transfer, etching, drilling and soldering.
Modular courses
Take Capture, PSpice or PCB Editor separately, or all three for the full picture.
03Who can learn
Who can join this course?
BE/BTech ECE and EEE students
Students who want practical board design skills for core electronics jobs.
BE/BTech EIE and Mechatronics students
Learners who design control and instrumentation circuits.
Diploma students in Electronics
Students who want a hands-on skill in layout and board making.
BSc and MSc Electronics students
Graduates who want to design and simulate their own circuits.
Final-year project students
Students who want a professionally designed PCB for their project.
Hardware and embedded engineers
Professionals who need to design or review boards themselves.
Before you start: Basic knowledge of electronic components and circuits is needed. Taking OrCAD Capture before PCB Editor is helpful, because the PCB course imports netlists from Capture.
04Levels & syllabus
Every OrCAD PCB Design level, topic by topic.
3 programmes on one page. Pick a level to see its modules and every topic covered.
Foundation level
Course on OrCAD Capture
Beginners who want a 20-hour course on drawing clean, validated schematics and netlists in OrCAD Capture.
20 hours7 modules · 43 topicsCode LWC117Certificate: Livewire network
7 modules · 43 topics
01Getting Started with Capture4 topics
Capture introductionSession log windowCreating a new project and designProject Manager – structure and functions
02Part Libraries5 topics
Working with part librariesAdding a library to a projectCreating a new library from the Project ManagerSetting the library storage locationCreating a new part in a library
03Schematic Page Setup8 topics
Schematic Page Editor window and toolsSchematic toolbarPage properties and page sizeGrid visibilityPage preferences – colours, pan and zoomAuto backupDesign templates and fontsCreating a title block
04Drawing the Schematic7 topics
Placing partsConnecting partsNet aliasesPower and ground symbolsCreating a busNo-connect markersMaking power pins visible
05Editing Parts and Designs6 topics
Modifying components in the Part EditorChanging properties in the Property EditorSelecting, moving, rotating, copying, mirroring and deleting objectsFinding a part on a pageCreating and editing textDrawing lines, rectangles, ellipses and arcs
06Multi-Sheet and Hierarchical Designs5 topics
Multi-sheet schematic foldersOff-page connectorsMulti-folder schematic projects and their purposeTypes of hierarchyCreating a hierarchical block
07Design Validation and Output8 topics
Annotating the designDesign rules checkCross-referencing partsBill of materialsInter-tool communicationNetlist creationBack annotationCapture CIS
Foundation level
Course on OrCAD PSpice
Students and engineers who want a 20-hour course on simulating analog, digital and mixed-signal circuits in PSpice.
20 hours6 modules · 26 topicsCode LWC118DSCertificate: Livewire network
6 modules · 26 topics
01PSpice Basics5 topics
PSpice introductionModifying a schematic for simulationNetlist creation for validating a designCreating and editing simulation profilesCommon errors and solutions
02Bias Point and Transient Analysis8 topics
Simulation profile for bias point analysisBias point analysisSimulation profile for transient analysisPlacing probes in the schematicDisplaying results in a single windowDeveloping a design with transient analysisMulti-window and split-window displayEditing waveform properties
03Parametric, Temperature and DC Sweep3 topics
Parametric analysisTemperature analysisDC sweep analysis
04AC Sweep and Noise3 topics
AC sweep analysisNoise analysisCreating multiple simulation profiles
05Statistical Analysis3 topics
Monte Carlo analysisWorst-case analysisStimulus Editor
06Digital and Mixed-Signal Simulation4 topics
Digital simulation with transient analysisMixed-signal analog/digital simulationMacro functionsCourse review and discussion
Foundation level
Course on OrCAD PCB Editor
Learners who want a 48-hour course on PCB layout, from footprints to multilayer routing, manufacturing files and making a board.
48 hours9 modules · 66 topicsCode LWC119DSCertificate: Livewire network
9 modules · 66 topics
01PCB Editor Environment7 topics
PCB Editor introductionPCB Editor design environmentDesign window, view log, toolbar and status barControl panel, World View window and Command windowClasses and subclassesEditing colour and visibility of design elementsDock windows – Options, Find and Visibility
02Padstacks5 topics
Working with padstacksPadstack types – circle, square and hexagonalPad DesignerRegular pad, anti-pad and thermal reliefPad dimensions
03Package Symbols (Footprints)6 topics
Working with packagesCreating a new package symbolPlacing the drawing originCalculating coordinates for assembly top, silkscreen top and pad locationsCreating an IC package symbol from given dimensionsUsing the Package Symbol Wizard – DIP
04From Schematic to Board6 topics
AnnotationBill of materials generationDesign rules checkImporting the netlist from CaptureApplying footprints to componentsReplacing sources with connectors
05Board Setup and Component Placement10 topics
Manual, room, edge, auto and net placementDrawing and trimming the board outlinePackage keep-in and route keep-in areasRotating, moving and deleting componentsCreating, saving and placing a mechanical symbolCreating a new design file with format symbols and mounting holesLayer cross-section and design parametersSaving a board templateColour192 and global visibilityComponent labels – reference designator, value, tolerance and device number
06Routing and Constraints8 topics
Manual routingAuto routing for single layer boardsConstraint ManagerDefault physical constraints and new physical constraint setsDefault spacing constraints and new spacing constraint setsChecking design status and DRC errorsUnconnected pins reportDangling lines report
07Multilayer Board Design9 topics
Introduction to multilayer board designAdding layers in the cross-sectionColouring layers with Colour192Multilayer routingThrough, blind and buried vias3D ViewerCopper pour for plane layersCopper for double and multilayer boardsShapes and assigning nets
08Manufacturing Output4 topics
Creating artwork (Gerber) filesViewing artwork filesGenerating drill filesCreating manufacturing files in PDF
09PCB Fabrication Practice11 topics
Working operation of the circuitTesting the circuit on a breadboardUsing a multimeterComponents needed for PCB fabricationRemoving the oxide layer from copper cladToner transfer by ironingEtching with ferric chloride solutionRemoving toner with thinnerDrillingMounting and soldering components and verifying outputOverview of all steps in making a PCB
05Choose your level
Which level is right for me?
Start with OrCAD Capture to learn schematics, then take PSpice if you want to test circuit behaviour before building it. Take OrCAD PCB Editor to turn schematics into manufacturable boards – it works best after Capture because it imports the Capture netlist. Taking all three gives you the complete design flow.
| Programme | Level | Hours | Best for |
|---|---|---|---|
| Course on OrCAD Capture Code LWC117 | Foundation | 20 h | Beginners who want a 20-hour course on drawing clean, validated schematics and netlists in OrCAD Capture. |
| Course on OrCAD PSpice Code LWC118DS | Foundation | 20 h | Students and engineers who want a 20-hour course on simulating analog, digital and mixed-signal circuits in PSpice. |
| Course on OrCAD PCB Editor Code LWC119DS | Foundation | 48 h | Learners who want a 48-hour course on PCB layout, from footprints to multilayer routing, manufacturing files and making a board. |
Foundation
Course on · Essential · Certificate · SKEP · Executive DiplomaStart here. Core tools, workflow and a practice project.
Professional
Proficient · ProfessionalIndustry-style exercises, advanced features and a portfolio project.
Master
Advanced · Expert · MastersComplete programmes that combine several tools and a capstone project.
06Hands-on
Projects you will build
You learn by making real deliverables – reviewed by your trainer before certification.
Regulated power supply schematic
Draw a power supply in Capture with a custom part, run DRC and create a BOM and netlist.
Amplifier simulation
Simulate a transistor or op-amp amplifier in PSpice with transient and AC sweep, then check tolerance with Monte Carlo.
Custom IC footprint
Build padstacks and a DIP package symbol from datasheet dimensions using the Package Symbol Wizard.
Double-layer board layout
Place components, set spacing constraints, route the board, add copper pour and export Gerber and drill files.
Hand-made PCB
Test a circuit on a breadboard, then transfer, etch, drill and solder a working board.
Tools & features covered
OrCAD CaptureCapture CISOrCAD PSpicePSpice Stimulus EditorOrCAD PCB Editor (Allegro engine)Pad DesignerPackage Symbol WizardConstraint Manager3D ViewerGerber, drill and PDF output
Talk to a counsellor about OrCAD PCB Design
Get the full syllabus PDF, current fee, offers and the next batch date on WhatsApp – usually within minutes during centre hours.
07Careers
Jobs you can apply for after OrCAD PCB Design
Roles that list this skill in Indian job postings.
PCB Design Engineer
Creates board layouts that meet electrical, mechanical and manufacturing rules.
PCB Layout Designer
Builds footprints, places parts and routes boards from schematics.
Schematic / CAD Engineer
Draws schematics, manages part libraries and produces BOMs.
Hardware Design Engineer
Designs circuits, simulates them and works with layout teams.
Circuit Simulation Engineer
Runs PSpice analyses to check designs before prototyping.
Library Engineer
Creates and maintains accurate symbols and footprints for a design team.
Electronics Test / Prototype Technician
Assembles, solders and tests prototype boards.
Salary you can expect
Fresher0–2 years₹2.4–4 LPA
Experienced3–5 years₹4.5–8 LPA
Senior6+ years₹9–16 LPA
Indicative ranges for India; pay varies by company, city, skills and experience. Figures in lakh per annum (LPA).
Industries that use it
Consumer ElectronicsAutomotive ElectronicsIndustrial ElectronicsPower ElectronicsMedical DevicesTelecom and NetworkingDefence and AerospaceElectronics Manufacturing Services
Companies that use these skills
Bharat Electronics (BEL)Tata ElxsiL&T Technology ServicesBosch IndiaContinentalHoneywellSchneider ElectricSiemens IndiaDixon TechnologiesFoxconnFlexJabilHCLTechCyient
Examples of well-known companies and sectors in India that use these skills. They are not CareerKraft partners or recruiters.
Your career path
1
Trainee PCB Designer
Build footprints, clean up schematics and route simple boards.
2
PCB Design Engineer
Lay out double and multilayer boards and prepare manufacturing files.
3
Senior PCB Designer
Handle high-density and high-speed boards and review others' layouts.
4
PCB Design Lead / Hardware Lead
Lead layout for product lines and set design standards.
Placements
Students placed from our centres
Vignesh K
Service Lab Assistant
Metric Measurement Technologies
Proficient in AutoCAD Electrical
AJ
Aminudeen J
Intern
Aptagrim Consulting Pvt. Ltd, Hyderabad
Master Program in Software Development
AC
Ashwini C
Teacher
Springdays CBSE School, Vellore
Course on Python
SB
Shilpa B
Associate Networker, Intern
Selfmade Ecom Pvt. Ltd, Rinex
Internship available: PCB Design internship (20 hours) – a short project-based track for college students.
08How you learn
Classroom, online or both.
Same syllabus and certificate in every mode. Your counsellor confirms the mode based on trainer availability for your batch.
Classroom
Learn in our labs at Katpadi, Vellore or Ranipet with your trainer beside you and classmates to build with.
Online
Live sessions from home with the same syllabus, projects and certificate. Good if you cannot travel every day.
Hybrid
Lab days plus online sessions around college or work. The mode depends on trainer availability for your batch.
Certificate
On completing a level and its project assessment, you receive the course certificate of the Livewire network, issued through CareerKraft as the authorised training partner.
Batches & timings
Weekday, weekend and fast-track batches within centre hours (Mon–Sat 9:30 AM – 6:30 PM · Sun 9:00 AM – 2:00 PM). Ask for the next start date at your centre.
Fees & EMI
The fee depends on the level and mode. Your counsellor shares the current fee, offers and EMI options on WhatsApp.
Why learn at CareerKraft
Authorised partner training
Structured syllabi and certificates from the CADD Centre, Livewire and SynergySBS networks.
Learn by doing
Hands-on lab work and a project assessed before you are certified.
Personal attention
Industry-experienced trainers and batches small enough to ask questions.
Placement support
Resume help, mock interviews and job leads when you are ready – no false promises.
Career guides that include this course
11Where to learn
Learn OrCAD PCB Design at any of 3 centres
Same syllabus, trainer standard and certificate at every centre. Tap the centre you want.
OrCAD PCB Design in Katpadi
Near Aascars Cinemas, Katpadi
Livewire Katpadi
OrCAD PCB Design in Vellore
Near Raja Theatre, Vellore
Livewire Vellore
OrCAD PCB Design in Ranipet
Near SBI, Muthukadai, Ranipet
Livewire Ranipet
Guides about OrCAD PCB Design
Technology
Embedded Systems Career Guide for ECE and EEE Students
Embedded engineers write the code that runs inside cars, meters, medical devices and appliances. Here is what the work involves and how to prepare for it.
8 min readRead
Technology
PCB Design Career Guide: Skills, Software and Jobs for Electronics Students
Every electronic product needs a printed circuit board. Learn what PCB designers do, the skills and software involved, and how to start this career.
8 min readRead
09FAQ
OrCAD PCB Design course – your questions answered
12 answers about levels, duration, eligibility, certificate, placement support and fees.
Still have a question? The counsellor at the centre you prefer replies on WhatsApp.
Ask on WhatsAppWhat is OrCAD?
OrCAD is a Cadence software suite for designing electronic circuits and boards. Capture is used for schematics, PSpice for simulation and PCB Editor for board layout and manufacturing files.
Who can join these courses?
ECE, EEE, EIE and Mechatronics students, electronics diploma and science students, and working hardware engineers can join. You should know basic electronic components.
How long is each course?
The Course on OrCAD PCB Editor is 48 hours. The Course on OrCAD Capture and the Course on OrCAD PSpice are 20 hours each.
Which course should I take?
Take Capture first for schematics. Add PSpice if you want to simulate circuits, and PCB Editor if you want to design boards for manufacture. Doing all three covers the full flow.
Can I learn online or in hybrid mode?
Yes, classroom, online and hybrid modes are offered, depending on trainer availability. The board fabrication practice in PCB Editor is done in the classroom.
Is there a free demo?
Please ask the counsellor at your chosen centre on WhatsApp or phone about demo sessions.
Will I get a certificate?
Yes, you receive a course completion certificate for each course you finish.
Do you provide placement support?
We provide placement support such as resume help, mock interviews and job leads. We do not guarantee a job.
What is the fee?
The counsellor at your chosen centre will share the current fee, offers and EMI options on WhatsApp, including any combined option for all three courses.
Do I need a laptop?
Lab systems with the software are available for classroom batches. For online classes you need a Windows laptop that can run OrCAD; the counsellor can guide you on software access.
What jobs and salary can I expect?
Freshers can apply for PCB layout, schematic and hardware trainee roles, often starting around ₹2.4–4 LPA. Pay grows with multilayer and high-speed design experience; figures are indicative and vary by company and city.
Which centre and timings?
The courses run at Katpadi, Vellore and Ranipet. Centres are open Monday to Saturday 9:30 am–6:30 pm and Sunday 9:00 am–2:00 pm.
10Keep exploring
Related courses
Electronic Design Automation
Microcontroller & Embedded C Course
Program 8051, PIC, AVR and ARM7 microcontrollers in embedded C – interface displays, motors and sensors, and connect over UART, I2C, SPI, CAN and wireless.
2 levels64 h
View course Electrical CADD
Basic Electrical (Executive Diploma) Course
A short, practical start in electrical fundamentals – circuits, wiring, earthing, safety and reading electrical drawings.
1 level20 h
View course Electrical CADD
Electrical CAD (AutoCAD Electrical) Course
Learn AutoCAD Electrical to draw control schematics, number wires, lay out PLC and panel drawings and generate BOMs and wiring reports.
2 levels64–80 h
View course Special Programs
Internet of Things (IoT) Course
Build connected devices with Arduino, NodeMCU, ESP8266 and Raspberry Pi, send sensor data to the cloud and control things from your phone.
2 levels48 h
View course Electronic Design Automation
Automotive Embedded Systems Course
Learn embedded C, ARM microcontrollers and in-vehicle networks – CAN, LIN, FlexRay and UDS diagnostics – and test ECUs with CANoe and CAPL.
2 levels48–160 h
View course Electrical CADD
Electric Vehicle (EV) Design Course
Learn how electric vehicles work and are designed – batteries and BMS, motors and powertrains, vehicle dynamics and range simulation.
3 levels40 h
View course Electronic Design Automation
Embedded Linux & Yocto Course
Learn Linux system programming, write kernel modules and character drivers, bring up a Raspberry Pi, and build custom Linux images with Yocto.
2 levels40–64 h
View course Listed in:
Start today
Get the OrCAD PCB Design syllabus, fees & batch dates
Fill this in and WhatsApp opens with your details, addressed to the centre you choose. The counsellor replies with the full syllabus, current fee, offers and the next batch.
- Free counselling and demo class
- Real projects and placement support
- Classroom, online or hybrid batches
- Replies Mon–Sat 9:30 AM – 6:30 PM · Sun 9:00 AM – 2:00 PM